Back to article
3348
ADAPTiQ system setup and deactivation
Find out how to turn on or turn off ADAPTiQ audio calibration. ADAPTiQ optimizes the sound of your system for the acoustics of your room. The contents of your room (i.e. surfaces, furniture, rugs, etc.) impact how sound is heard in the room. The calibration process measures the properties of your room and adjusts the sound of your system accordingly. If you re-arrange your room or move your system to a different room, re-calibrate your system.
To turn on ADAPTiQ, run the audio calibration:
Before you begin, be sure the soundbar and any accessory bass module surround speakers are connected and placed where you want them.
- On the back of the soundbar, connect the ADAPTiQ headset to the ADAPTiQ jack.
- Place the headset on your head.
- On the remote control, press the SoundTouch button.
- Press and hold the 8 button until the TV and Bluetooth® lights on the soundbar glow green.
To choose a different language, use the up and down arrow buttons. To return to the default language, press and hold the 8 button for 10 seconds. - Follow the voice prompts to calibrate your system.
- When complete, unplug the headset from the soundbar and store it in a safe place for future use.
To turn off ADAPTiQ, restore the default system settings:
To turn off the ADAPTiQ audio calibration, restore the default settings of your system. For more info, see Resetting your product.
Was this article helpful?
Thank you for your feedback!