FREE 1 – 2 DAY DELIVERY (ORDERS OF $30 OR MORE) & FREE RETURNS

Lifestyle® SoundTouch® 525 entertainment system

Sold from 2015 – 2016

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Setting Set-top Box Overscan

Set-top Box Overscan is helpful if you notice video artifacts at the edge of the picture on your TV. Turning this setting on can reduce or eliminate problems at the edge of the image.

To turn on or off the Overscan setting:

Note: If playing 3D content, this setting shows Not Available and cannot be adjusted.
  1. On the remote control, select the video source you want to adjust
  2. Press the More button
    Tip: If the system menu does not appear on your TV, be sure the correct TV input is selected
  3. Scroll Right to select Options, then press the OK button
  4. Scroll up or down to select [Source] Overscan
  5. Scroll left of right to select On or Off
  6. Press the Exit button to exit the menu.
Was this article helpful?
Submit
Thank you for your feedback!