FREE 1 – 2 DAY DELIVERY (orders of $30 or more) & FREE RETURNS

Enabling the optical digital input for an audio source

If you connect digital audio from an external device to your 3·2·1 media centre using an optical cable, you must assign the source that will receive the digital audio signal through that connection. For example, if you connect the digital audio from a cable or satellite box to the media centre using an optical cable, you must assign the optical connection to the CBL∙SAT source.

You should also connect analogue audio cables (red and white RCA) to the CBL∙SAT L (left) and R (right) audio inputs on the media centre. If the digital signal is interrupted, the analogue connection will ensure continuous audio play.

To assign the optical connection, follow these steps:

Turn your TV on.

Using your 3·2·1 system remote, turn your 3·2·1 system on by pressing ON/OFF.

Press the SYSTEM button on the remote. The system menu appears on the TV.

Press the RIGHT ARROW to highlight the "MEDIA CENTRE" icon.

Press the DOWN ARROW to highlight "OPTICAL SOURCE."

Press the RIGHT ARROW. "NONE" is highlighted.

Press the UP ARROW or DOWN ARROW to select the source that is to receive the digital audio signal: "TV," "CBL-SAT" or "Aux."

Press ENTER.

Press EXIT to leave the menu.

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided