Back to article
3348
Reconnecting a Bluetooth® device that you have already connected
Your product remembers the last several Bluetooth devices it was paired to so that it can quickly and automatically reconnect to them. This is useful if your product connects to a different device when you turn it on, or if you just want to switch to a different device.
Reconnecting a Bluetooth® device that you previously connected happens automatically.
When you select the Bluetooth source on your speaker, it tries to auto-select the last connected Bluetooth device. If that device is not available and you've connected other devices, there might be a short delay while it looks for those other devices in order of last connected.
To connect a different device, hold the Bluetooth button on your remote for a couple seconds until the Bluetooth light slowly blinks. This puts your speaker in Discoverable mode. Now, select your speaker from the Bluetooth menu of the device you want to connect. For more help, see Connecting a Bluetooth device.
To connect a different device, hold the Bluetooth button on your remote for a couple seconds until the Bluetooth light slowly blinks. This puts your speaker in Discoverable mode. Now, select your speaker from the Bluetooth menu of the device you want to connect. For more help, see Connecting a Bluetooth device.
If you are unable to connect a Bluetooth device, try our troubleshooting suggestions.
For more info, see Cannot connect a Bluetooth device.
Was this article helpful?
Thank you for your feedback!