Programming your remote

The programmable universal remote control (shown below) is available as an accessory for your product. The remote that came with your product cannot be programmed to control other devices.

Here are some things to know:

• Some brands have many devices, so you might need to try several codes to find one that works
• If the source button on your remote turns off, it is not in programming mode. Start the programming process again
• While your univeral remote can control many devices, it might not be able to control or fully control all devices

To program the universal remote:

1. In the remote control code booklet included with your system, find the code for the brand you want to control
   Tip: If you need the code booklet, search for and select your product at bose.com/support, then click the Downloads tab
2. On your remote, press and hold the source button of the device you want to control (i.e. TV or CBL-SAT) until all six source buttons glow
3. Release the button so only the button you held glows
4. Enter the code for the device brand, then press the Vol+ button
   Tip: If all six source buttons blink three times, an invalid code was entered
5. Check if the remote controls the device:
   • For TVs, try the Channel buttons, then press Menu and try browsing with the Arrow buttons
   • For cable/satellite boxes, press the GUIDE button and try browsing with the Arrow buttons
   • For DVD/Bu-ray players, press the Menu or GUIDE button and try browsing with the Arrow buttons
   • For game systems, try browsing with the Arrow buttons
6. If the code works, press EXIT to save your settings
7. If the code does not work, press VOL+ to select the next code for the brand, then repeat step 5
   Tip: If the six source buttons on your remote blink three times, there are no additional codes for the brand.

After programming the remote to control an external device, press the device button on the remote to tell it which device you want to control. For example, to control your cable or satellite box, press the CBL-SAT button on the remote, then press the buttons you want to control on your cable or satellite box.