Shop Confidently, knowing we’ll match a lower price – Chat with one of our agents or call 1800-023-367
Stores Cart

Bose S1 Pro Portable Bluetooth® Speaker System

Sold from 2018 – present

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

No audio from product

If your product seems to be set up properly but does not produce sound, try the following:

If anything is plugged into Input 3, unplug it to use Bluetooth®.

On your product, Input 3 lets you to connect an audio device using either a 3.5mm connection or a wireless Bluetooth connection. When the 3.5mm jack is connected, Bluetooth is disabled. Disconnect the 3.5mm jack to connect a Bluetooth source.

Be sure the system is set up properly and all connections are secure.

A connection may have come loose or may be connected incorrectly. For more info, see Setting up your product.

Check the volume level of the Bose system.

Be sure the system volume is not turned down. Using the volume control, gradually increase the volume level.

Turn up the volume of the connected device.

Set the device volume to 90–100% to send a strong signal to your product. Then, use your product to adjust the volume level.

Reboot the connected device.

Electronics might need to be reset from time-to-time—much like rebooting a computer. Power off the device, then power it back on and try again.

Replace the input cables.

Try different input cables using the same source and same channel. If this solves the problem, the original cables may be defective.

Plug in a different audio source.

Connected a different audio source to determine if the issue is related to the source: If audio is being sent to your system from a a microphone, try a different microphone; if an instrument is connected, try a different instrument.

Condenser microphones are not compatible with this system.

Condenser microphones require power that this system cannot provide.

Plug in to a different input on your product.

Determine if the issue is related to a particular input by connecting the audio source to a different input using the same audio source and cable(s).

Try a different output on the mixer or audio source.

If the audio source has more than one output (i.e. a mixer with main and aux outputs), connect to another output with the same cables to determine if the output is the issue.

Try a different powered speaker or sound system.

If available, connect a to different powered speaker to determine if the issue is related to the audio source or connecting cables.

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Was this article helpful?
Submit
Thank you for your feedback!