Back to article
3344
No power
If your product is connected to power but does not appear to be receiving power, try the following:
Be sure the headset is powered on.
On the bottom of the headset, make sure the power switch is in the on position, indicated by the visible green area under the switch. The LED will light for 10 seconds after being turned on.
Check if the battery is charged.
Be sure the battery is not depleted. For more info see, Checking the remaining battery charge and Charging your headphones.
Use a wall outlet USB charger to charge your headset.
Charger specifications vary. Be sure to use a UL/CE approved charger that provides 1 Amp. (Tip: Chargers that provide lower amperage (like a computer USB port) will take longer to charge your headset.)
Reset your product.
Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Was this article helpful?
Thank you for your feedback!